Loker Batam PT. IntriCon Indonesia

PT. IntriCon Indonesia Batam
Lowongan Kerja
Intricon. MICROMEDICAL TECHNOLOGY yang ber-Alamat: Jl. Beringin No.Lot 311, Muka Kuning, Kec. Sei Beduk, Kota Batam, Kepulauan Riau 29433, Email : batamhr@intricon.com.sg
QC Inspector
Dengan Syarat Sebagai berikut :
- Perempuan/Wanita
- Belum menikah/Single
- Pendidikan minimal SMA/SMK Sederajat
- Umur Minimal 19-25 tahun ( maximal )
- Berpengalaman di bidang yang sama minimal 2 tahun pengalaman
- Melampirkan pengalaman
- Melampirkan Ijazah
- Melampirkan SKCK
- Melampirkan Sertifikat vaksin
lamaran dapat di kirim melalui email perusahaan, harap melampirkan berkas pendukung ( file di scan ) dan di kirim ke Email :
Email PT. INTRICON Indonesia :
Email PT. INTRICON Indonesia :
batamhr@intricon.com.sg
Product Engineer
Requirement :
Requirement :
- Transfer and implement the manufacturing / assembly processes.
- Drive and accountable for continuous improvement on UPH & yield.
- Participate in Lean Manufacturing System to achieve all targeted objectives and goals.
- Troubleshoot and implement solutions to resolve any process or assembly related issues.
- Conduct engineering qualification runs to verify the process improvement recommendations.
- In charge of new product that are transferred to Production, if applicable.
- Develop procurement specification for new equipment purchase.
- Perform commissioning on new or transferred equipment/tester
- Troubleshoot and resolve equipment problems.
- Design and implement machine modification or equipment design improvement to achieve uptime and through put goals.
- Perform material evaluation and qualify new parts. Make improvement related to jig / fixture / mold design.
- Supervise technician in achieving quality and on-time PM completion of machined parts/tooling.
- Provide specification and co-ordinate with vendor on the fabrication and qualification of jig /fixtures.
- Work with trainers to review adequacy of line training system, package and needs.
- Train supervisor / technician / leader on new tooling and engineering related processes.
- Maintain & improve in QMS system.
- Follow up on critical and urgent issues, work with leaders and other departments towards resolving them.
- Provide immediate escalation to HOD.
- Other duties may be assigned.
General requirements :
- Possess bachelor's degree in Engineering with 5 years working Manufacturing. experience in
- Bing self-motivate, ability to work independently and ability to lead the team.
- Person with strong analytical capability and good problem-solving skills.
- Able to work under pressure and staying commitment to make things happen.
- Effective communication skill to express in English through oral & written form is a must.
Please send your CV and expectancy salary to below email: batamhr@intricon.com.sg (email subject: Product Engineer)
Production Supervisor
Requirement :
Requirement :
- Have good communication & feedback channels to line leaders and operators and management periodically.
- Manage and control inventory-WIP at targeted levels.
- Drive and train subordinate on Lean Manufacturing System to achieve all monthly targeted goals.
- Skill metrics for operators must be updated to monitor operator's skill level.
- Plan, organize and control production activities to meet production schedule per customer's demand.
- Co-ordinate's activities, Line balancing & Manpower deployment of production lines with operators and line leaders.
- Maintain the 7s program in production.
- Maximize resources to reduce operation cost.
- Manage a group of Line Leaders and Production Operators to achieve Production targets in terms of quality and quantity.
- Must be able to perform counseling & disciplining of subordinates when necessary.
- Drive and accountable for continuous improvement on UPH & Yield. • Ensure Production line leaders and operators to follow company's policy.
- Must maintain and improve company QMS system.
- Liaison with personnel from other departments to achieve Production targets.
- Ensures that engineering specification and procedures are followed.
- Follow up on critical and urgent issues, work with leaders and other departments towards resolving them. Provide immediate escalation to HOD. Other duties may be assigned.
- Possess diploma or bachelor's degree with 5 years working experiences in production manufacturing.
- Being self-motivate, ability to work independently and ability to lead the team.
- Person with strong analytical capability and good problem-solving skills.
- Able to work under pressure and staying commitment to make things happen.
Effective communication skill to express in English through oral & written form is a must.
Please send your CV and expectancy salary to below email: batamhr@intricon.com.sg (email subject: Production Supervisor)
Please send your CV and expectancy salary to below email: batamhr@intricon.com.sg (email subject: Production Supervisor)
UPDATE 8 APRIL 2022
OPERATOR
Kriteria:
- Perempuan, pendidikan min. SMA/sederajat
- Berpengalaman min. 2 tahun di bagian Soldering dengan menggunakan mikroskop.
- Sehat jasmani dan rohani
Persyaratan Berkas :
- Pendidikan Terakhir Min SMU atau Sederajat
- Memiliki E-KTP
- Memiliki Ijazah SMA/ Sederajat
- Memiliki Pas foto
- Memiliki SKCK yang masih berlaku dan aktif
- Memiliki Kartu pencari kerja/AK1 dari disnaker Ketenagakerjaan yan masih berlaku dan aktif
- Memiliki kartu identitas yang VALID
- Memilki Kartu Kesehatan dari klinik maupun dari dokter
- Berkas PENGALAMAN KERJA
- Memiliki Transkrip Nilai SMA
- Memiliki Kartu keluarga
- Memiliki AKta kelahiran Jika di butuhkan
- Memilki Npwp ( Jika ada )
- Memilki BPJS kesehatan ( Jika ada )
- Memiliki BPJS ketenagakerjaan ( Jika ada )
- Lamaran paling lambat diterima tanggal 11 April 2022.
Kirimkan lamaran pekerjaan dengan mencantumkan judul SOLDERING pada subyek email ke:
batamhr@intricon.com.sg
batamhr@intricon.com.sg
LOWONGAN KERJA UPDATE 19 NOVEMBER 2021
Product Engineer
Requirement:
Please send your CV and expectancy salary to below email: batamhr@intricon.com.sg
(email subject: Product Engineer)
Requirement:
- Transfer and implement the manufacturing / assembly processes.
- Drive and accountable for continuous improvement on UPH & yield.
- Participate in Lean Manufacturing System to achieve all targeted objective and goals.
- Troubleshoot and implement solutions to resolve any process or assembly related issues.
- Conduct engineering qualification runs to verify the process improvement recommendations.
- In charge of new product that are transferred to Production, if applicable.
- Develop procurement specification for new equipment purchase
- Perform commissioning on new or transferred equipment / tester.
- Troubleshoot and resolve equipment problems.
- Design and implement machine modification or equipment design improvement to achieve uptime and through put goals.
- Perform material evaluation and qualify new parts.
- Make improvement related to jig / fixture / mold design.
- Supervise technician in achieving quality and on-time PM completion of machined parts /tooling.
- Provide specification and co-ordinate with vendor on the fabrication and qualification of jig /fixtures.
- Work with trainers to review adequacy of line training system, package and needs.
- Train supervisor / technician / leader on new tooling and engineering related processes.
- Maintain & improve in QMS system.
- Follow up on critical and urgent towards resolving them.
- Provide immediate escalation to HOD. Other duties may be assigned.
- Possess bachelor's degree in Manufacturing. Engineering issues, work with leaders and other departments. with 5 years working experience
- Bing self-motivate, ability to work independently and ability to lead the team.
- Person with strong analytical capability and good problem-solving skills.
- Able to work under pressure and staying commitment to make things happen.
- Effective communication skill to express in English through oral & written form is a must.
Please send your CV and expectancy salary to below email: batamhr@intricon.com.sg
(email subject: Product Engineer)
Posting Komentar untuk "Loker Batam PT. IntriCon Indonesia"